слоупинг но но
если кто не дружит с английским и/или гугл-транслейтом, чуть позже переведуIn designing the our first compact prototype back in mid '98, we wanted to discover what if any the real world differences there would be between traditional and compact frame designs. Our first compact frame (still my favorite frame) was an exact replica of my then current titanium frame in materials and geometry save for the sloping top tube. I designed it with a severe (17 degree) slope to ensure that any differences would be as obvious as possible. We had assumed that the new frame would be somewhat stiffer and lighter. It was lighter (about 4 ounces) but it was not appreciatively stiffer. Although we were able to measure a slight increase in stiffness, it was too slight to feel. The big change came when I stood to accelerate or climb. As I stood up, the bike appeared to loose three pounds. The inertia of the bike as I rocked it back and fourth was reduced so much that I felt as though I was on a twelve-pound bike. Interestingly, when seated, a compact frame feels exactly like a traditional design. The compact design has no effect on handling beyond the increases responsiveness during climbing and accelerating.
